Application Guide
Everything you need to know about applying JustTeak.
Application Guides
Step One
Teak
Cleaner
Step Two
Teak
Brightener
Step Three
Teak
Sealer
- Hose down entire area with water.
- Ensure the teak does not dry during the cleaning process.
- Applying the Teak Cleaner with a soft polypropylene cleaning pad, gently scrub the product across the grain of the teak. The teak will
turn dark brown and the cleaning pad will fill with dirt. - Apply to one area at a time then immediately rinse down entire area with water to remove the cleaner. Repeat if necessary.
- Following the application of Part 1: Teak Cleaner.
- Hose down entire area with water.
- Ensure the teak does not dry during the cleaning process.
- Apply Teak Brightener with a soft polypropylene cleaning pad, gently scrubbing across the grain of the teak. The teak will immediately lighten in colour.
- Apply to one area at a time then immediately rinse down entire area with water to remove the Teak Brightener. Repeat if necessary.
- Shake then stir teak sealer prior to use.
- Apply the sealer by either rag, brush or pad applicator, along the length of the board to ensure even colouring and to avoid line marks.
TIP: Stir product periodically whilst applying to ensure even colouring. - Apply generously and allow to dry. Soak up any areas that have not absorbed the sealer.
- When touch dry, apply 1-2 subsequent coats until teak stops absorbing the sealer.
